Cisco 8851 Snelle referentiehandleiding - Pagina 3

Cisco 8851 MPP Quick Reference Guide

To swap between the two calls:

4. Use the Navigation button to highlight the Held call, then press the Resume softkey

To join both parties into a conference:

5. Use the Navigation button to highlight the Active call, then press Conf line softkey

Call Waiting

The Call Waiting feature enables the user to take two calls simultaneously

1. While on a call, when another call comes in press the Answer softkey (this places the

first call on hold)

To swap between the two calls:

2. Use the Navigation button to highlight the Held call, then press the Resume softkey

While on a call you can place the call on Mute, this prevents the caller from hearing you, but you can

still hear the caller. To mute a call:

Press

2. Press

Adjusting the Ringer and Volume

1. Press -/+ to adjust the ring volume when the phone is idle or use to adjust

the volume of the other party while on an active call

There are two ways of transferring a call – Blind (direct transfer) and Consult (announced transfer).

Blind Transfer

1. During a call, press the BlindXfer softkey

2. Dial the other destination phone number

3. The call will transfer directly

Consult Transfer

1. During a call, press the Transfer

2. Enter the destination phone number

3. When the second party answers, announce the call then press the Transfer button

or Transfer softkey to complete the transfer

If the party refuses the call

4. Press the EndCall softkey then the Resume softkey to return to the original call

Cisco 8851 MPP QRG

during an active call.

again to un-mute the call.

button or the Transfer softkey

23/06/20