Cisco 8851NR Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco 8851NR. Cisco 8851NR 24 pagina's. Add buttons to your phone
Ook voor Cisco 8851NR: Kenmerken (16 pagina's), Handmatig (44 pagina's), Handmatig (14 pagina's), Snel aan de slag (2 pagina's)
Pagina afdrukken
Connect to the Network
Connect to the Network
Your phone needs to be connected to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
• Wireless connection—The phone connects to a Wireless Access Point using Wi-Fi.
• Virtual Private Network (VPN)—After the phone is connected to the network, it is set up to automatically
• Mobile and Remote Access through Expressway—After the phone is connected to the network, it is set
Set Up Wi-Fi Client
The Cisco IP Phone 8861 and 8865 can access a Wi-Fi network, but a power adaptor is required to power the
phone. The Cisco IP Phone 8865NR cannot be used with a Wi-Fi network.
Before You Begin
Your administrator needs to configure settings on the call control system to enable Wi-Fi access.
Procedure
Step 1
If the phone is plugged into the Ethernet, unplug the Ethernet cable.
Step 2
Press Applications
Step 3
Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.
Step 4
Navigate to Wireless and press On.
Step 5
Navigate to Wi-Fi sign in access and press On.
Step 6
Press Apply to save the changes, or press Revert to cancel the changes.
Connect to a Pre-Configured Wi-Fi Network
You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR
does not support Wi-Fi.
Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi
network or when your phone powers up.
You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.
Cisco IP Phone 8800 Series User Guide
6
connect into a protected network.
up to automatically connect to the Expressway server.
.
Your Phone