Cisco Aironet 521 Snelstarthandleiding - Pagina 13

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Aironet 521. Cisco Aironet 521 26 pagina's. Ip phones with multiplatform firmware
Ook voor Cisco Aironet 521: Handmatig (35 pagina's), Gebruikershandleiding (46 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Installatiehandleiding (39 pagina's), Handmatig (24 pagina's)

Pagina afdrukken

a521qsg.fmb Page 11 Monday, March 12, 2007 10:40 AM

D R A F T - C I S C O C O N F I D E N T I A L

If you are not connected to a DHCP server, you can assign an IP address to

the access point using the CLI. In this situation, obtain a unique IP address

for your access point, a default gateway, and subnet mask from your network

system administrator.

Mounting the Access Point

The access point uses a detachable universal mounting plate to mount the

access point to flat surfaces such as a wall or ceiling. The universal mounting

plate is also used to mount the access point to an electrical or network

junction box, or to the provided rail clips for below a suspended ceiling.

The mounting process is simple and requires common tools. Because it is

detachable, you can use the universal mounting plate to mark the positions of

the mounting holes for your installation. You then install the universal

mounting bracket on the surface and attach the access point when you are

ready.

When you have mounted the access point, its padlock post enables you to

protect the Ethernet, power cables, and Mode button, and to lock the access

point with a padlock.

Quick Start Guide Cisco Aironet 521 Access Points