Cisco Cisco Headset 561 Installatiehandleiding - Pagina 28

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Cisco Headset 561. Cisco Cisco Headset 561 39 pagina's. Ip phones with multiplatform firmware
Ook voor Cisco Cisco Headset 561: Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (3 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (46 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Handmatig (24 pagina's), Snelle referentiehandleiding (7 pagina's)

Wall Mount Your Phone

Wall Mount Your 8800 Series Phones

The following wall mount options are available:

• Cisco IP Phone 8800 Series Wall Mount Kit: A nonlockable wall mount kit available for the Cisco IP Phone

8800 Series. This wall kit applies to Cisco IP Phone 8811, 8841, 8851, and 8861. The PID is CP-8800-WMK=.

• Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM: The kit is installed on the Cisco IP Phone 8851

and 8861 with one attached Cisco IP Phone 8800 Key Expansion Module. The PID is CP-8800-BEKEM-

WMK=.

Mount the wall bracket in the desired location.

Installation Guide for Cisco IP Phone with Multiplatform Firmware

Components:

1. Four #8-18 x 1.25-inch Phillips-head screws

2. Four anchors

3. Two K30x8mm self-tapping screws

4. One phone bracket

5. One wall bracket

6. One 6-inch Ethernet cable

Plug in the handset cable, then attach the phone

bracket to the rear panel of the phone.