Cisco Cisco Headset 562 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco Cisco Headset 562. Cisco Cisco Headset 562 46 pagina's. Ip phones with multiplatform firmware
Ook voor Cisco Cisco Headset 562: Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (3 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (40 pagina's), Administratiehandleiding (48 pagina's), Installatiehandleiding (39 pagina's), Handmatig (24 pagina's), Snelle referentiehandleiding (7 pagina's)

Cisco Headset 560 Series Multibase

• USB to USB Cable: for Cisco IP Phones with USB connectivity

• USB Y-Cable: for Cisco IP Phones without a USB port

• Mini USB Cable: for PC or Mac.

Figure 5: Multibase LEDs

The following table describes the multibase.

Table 8: Multibase LEDs

Number

Cisco Headset 500 Series User Guide

Note

Your Cisco IP Phone administrator must enable hookswitch calling for the Y-Cable

to work.

Name

Battery Status LED

Description

Indicates the headset battery charge and base status:

• Headset battery strength—LEDs blink and change to

solid as the battery charges.

• Headset update in progress—LEDs blink in sequence,

left to right.

• Headset and base not paired—All LEDs blink

• Power save mode—Middle LED shows solid.

The base enters power save mode when there is no call source

connectivity after 10 minutes.

Your Headset