Cisco CP-7910GSW Aan de slag handleiding - Pagina 18

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco CP-7910GSW. Cisco CP-7910GSW 34 pagina's. Getting started guide

Note

Getting Started with the Cisco IP Phone 7910 Series

3-2

You can place calls with the handset or speaker, but you can only talk to your party

through the handset. Through the speaker, you can only listen to a call. These

sections describe the use of the handset and speaker and how to adjust the volume

of the call:

Using the Handset, page 3-2

•

Using the Speaker, page 3-2

•

Adjusting the Handset Volume, page 3-3

•

Adjusting the Speaker Volume, page 3-3

To place and answer calls with the handset, simply lift the handset. To change

from handset to speaker, press Speaker and hang up the handset.

The speaker is designed to be used for "hands-free" dialing. You can use it to

place a call, and then pick up the handset if the other party answers the phone.

The speaker does not allow for two-way communication. However, you can have

the handset off-hook with the speaker on, enabling the calling party to hear you

over the handset while you listen through the speaker. You might want to do this

if you want to use the phone for conference calls.

To place calls using the speaker, press Speaker and dial the number. When the

party answers, pick up the handset. If the handset is off-hook with the Speaker

button enabled, you can speak into it, allowing the calling party to hear you. This

allows others to listen to both sides of the conversation.

If you are only listening to a call, you can leave the handset in the rest. The mute

button automatically lights, indicating that the calling party cannot hear you.

When finished with the call, press Speaker to hang up.

You cannot use the speaker to transmit your voice.

Chapter 3

Using the Cisco IP Phone 7910 Series

78-11443-02