Cisco Nexus 7000 Series Handleiding installeren - Pagina 15

Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 16 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Installing the Switch Chassis

We recommend that you change the air filter every 3 months. However, examine the air filter once a month

Note

(or more often in dusty environments) and replace it if it appears to be excessively dirty or damaged. To

comply with Telecordia GR-63-Core standard air filter requirements for NEBS deployments, the air filter

must be replaced, not cleaned.

Step 2

Attach the front door as follows:

a) Place the front door on the chassis by aligning the guidepins on the front door with the slot holes on the cable

management assembly.

Figure 9: Placing the Door on the Cable Management Frames

Align the guidepins on the front door with the slot holes on the cable management assembly.

b) Push to snap fit the front door to the cable management assembly.

Attaching the Front Door to the Chassis

Installing the Switch Chassis