Ricoh 4700W Systeeminstellingen - Pagina 18

Blader online of download pdf Systeeminstellingen voor {categorie_naam} Ricoh 4700W. Ricoh 4700W 42 pagina's. Savin copier operating instructions

DolphinGB-Syst-F_V4_FM.book Page 6 Wednesday, May 2, 2001 1:19 PM

Combined Function Operations

{Start} key

11.

Press to start copying. The default setting

is for the originals to be scanned first, and

then copied. You can also use this key to

resume an interrupted copy job (Restart

Copy) or repeat a copy job (Repeat

Copy).

12.

Operation Switch

Use this to turn the power on or off. The

power indicator is lit when the power is

on.

13.

Main power indicator

Light up when the main power switch is

set to on.

{Scanner Stop} key

14.

Press this key if originals are fed at a

slant, or if you want to cancel scanning

while an original is being fed into the ma-

chine.

You can also use this to release the paper

edge hold function.

Note

❒ If [Rear: Edge Hold] is selected for

"Original Output Tray" in System Set-

tings, when the originals are output to

the rear of the machine, the originals

are held after they have been scanned.

You can use the {Scanner Stop} key to

release this paper edge hold function.

❒ You can change the original output

tray setting in User Tools. See p.20

"Original Output Tray"