ActronAir Easyconnect OSK105 Installatie- en installatiehandleiding - Pagina 8

Blader online of download pdf Installatie- en installatiehandleiding voor {categorie_naam} ActronAir Easyconnect OSK105. ActronAir Easyconnect OSK105 20 pagina's. Wall hung systems

Pagina afdrukken

Installation Guide

05. Network Configuration

NOTE

• Ensure that the Android or iOS device can be automatically connected

to the Wi-Fi network - you can adjust this in your phone settings.

• To configure Easyconnect, a wireless remote controller must be used -

these are supplied as standard with all ActronAir wall hung systems.

There are two ways to configure the network connection. This may be done

via Bluetooth, scanning for available devices or by manual selection of the

device.

05.01. Bluetooth Scanning

Ensure that blue-tooth on the mobile device is ON

2. Power the Air conditioner off from the power supply for 15 seconds, then back

on again.

3. Within 8 minutes of power being reset, press the LED button on the remote

control 7 times (within 10 seconds) - this will initiate access point mode and

allow your phone to link with the Easyconnect app setup process.

1. Tap on + Add Device.

Installation Guide - Easyconnect App

Document: 9590-4008 Ver. 4 220211

Easyconnect App