Cisco SPA 303 Series Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco SPA 303 Series. Cisco SPA 303 Series 5 pagina's. Cisco small business spa300 / spa500 series
Ook voor Cisco SPA 303 Series: Snelstarthandleiding (2 pagina's), Gegevensblad (7 pagina's), Handleiding voor installatie en probleemoplossing (11 pagina's), Snelstarthandleiding (6 pagina's), Snelstarthandleiding (18 pagina's), Snelle gebruikershandleiding (2 pagina's), Gebruikershandleiding (6 pagina's), Gebruikershandleiding (12 pagina's), Snelstarthandleiding (2 pagina's)

You will see the CommPortal Dashboard and following tabs when you first login:

Trouble?

•

Check Ethernet Cable Connection is in the network port on the phone body marked "SW" and in the correct

device port, such as a network switch, on your network.

•

Verify power supply is connected correctly.

•

To reboot the phone, use the keypad and press the setup button and dial 12, then press the OK softkey

displayed on the Network screen.

•

If asked by support to verify Enable VLAN is on/off, press the Setup button, dial 9 and dial 16. Current VLAN

setting is displayed on the Network screen. It should be set to VLAN "No"