Cisco SPA232D Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco SPA232D. Cisco SPA232D 17 pagina's. Ip dect handset
Ook voor Cisco SPA232D: Gebruikershandleiding (10 pagina's)

Pagina afdrukken

To verify that the handset registered to the base station, confirm

TEP

that the wireless status icon is solid and that the handset ID, such

as DECT1 or DECT 2, appears near the top right corner of the

display screen.

Additional Information

Using the IVR for Administration

An IVR system is available to help you to configure and manage your ATA.

You can use the telephone keypad to select options and to make your

entries.

To access the IVR menu:

Connect an analog phone to the PHONE port of the ATA.

TEP

Press the star key four times:

TEP

After the greeting plays, press the keys on the phone keypad to

TEP

select your options.

Enter the code for the desired action. See the

TEP

details.

TIPS:

• Enter the numbers slowly, listening for the audio confirmation before

entering the next number.

• After you select an option, press the # (pound) key.

• To exit the menu, hang up the telephone or enter 3948# to exit.

• After entering a value, such as an IP address, press the # (pound) key to

indicate that you have finished your selection. To save the new setting,

press 1. To review the new setting, press 2. To re-enter the new setting,

press 3. To cancel your entry and return to the main menu, press

• While entering a value, you can cancel the changes by pressing the

(star) key twice within half a second. Be sure to press the key quickly, or

the

will be treated as a decimal point entry.

• If the menu is inactive for more than one minute, the ATA times out. You

will need to re-enter the menu by pressing the star key four times:

Your settings take effect after you hang up the telephone or exit the IVR.

The ATA may reboot at this time.

****

Cisco SPA232D Quick Start Guide

IVR Actions

table for

(star).

****