Ricoh Aficio AP400 Snelle installatiehandleiding

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Ricoh Aficio AP400. Ricoh Aficio AP400 2 pagina's. Sap printing
Ook voor Ricoh Aficio AP400: Gebruiksaanwijzing (20 pagina's), Installatiehandleiding (4 pagina's), Gebruiksaanwijzing (30 pagina's), Handmatig (12 pagina's)

Pagina afdrukken

Ricoh Aficio AP400 Snelle installatiehandleiding

QUICK INSTALLATION GUIDE

Please read the Safety Information in the Setup Guide or Printer Reference before using this machine.

It contains important information related to USER SAFETY and PREVENTING MACHINE PROBLEMS.

WHERE TO PUT THE PRINTER

Space Required for Installing the Printer

Leave enough space around the printer. This space is neces-

The printer's location should be carefully chosen

sary to operate the printer. The recommended (or minimum)

because environmental conditions greatly affect its

space requirement is as follows:

performance.

Warning

• Confirm that the wall outlet is near the machine

and freely accessible, so that in event of an

emergency, it can be unplugged easily.

• Only connect the machine to the power source

described on this sheet.

• Avoid multi-wiring.

• Do not damage, break or make any modifica-

tions to the power cord. Do not place heavy ob-

A: more than 10 cm (4.0")

jects on it, pull it hard or bend it more than nec-

essary. These actions could cause an electric

B: more than 10 cm (4.0")

shock or fire.

C: more than 100 cm (40.0")

D: more than 10 cm (4.0")

Caution

• Keep the machine away from humidity and dust.

A fire or an electric shock might occur.

• Place the machine on a strong and level sur-

face. Otherwise, the machine might fall and

cause personal injury.

UNPACKING THE PRINTER AND

• If you use the machine in a confined space, con-

CHECKING THE CONTENTS OF

firm that there is a continuous flow of air.

THE BOX

Optimum Environmental Conditions

Recommended temperature and humidity

Check the contents of the box according to

%RH

C 80%

the following list. If one or some items are miss-

ing, please contact your sales or service rep-

70%

resentative.

54%

30%

The interface cable is not included in the box. Make

C 15%

sure that the interface cable you use, is appropriate

for your computer.

%RH

50°F 80%

80.6°F 80%

59°F

77°F

70%

89.6°F

54%

59°F

77°F

30%

89.6°F 15%

50°F 15%

°F

Possible operation range

Recommended range

Remove the plastic bag. Lift the printer and move

The machine must be level within 5 mm, 0.2" both front to rear

it to the place where you want to install it.

and left to right.

When lifting the machine, use the inset grips on both sides. Otherwise

Environments to Avoid

the machine could break or cause injury if dropped.

Important

Locations exposed to direct sunlight or strong light

Dusty areas

Areas with corrosive gases

Areas excessively cold, hot, or humid

Locations near an air conditioner or humidifier

Locations near other electronic equipment

Locations where the printer might be subjected to

frequent strong vibration

Remove the orange adhesive tape.

Power Connection

Connect the power cord to a power source with the follow-

ing specifications:

120V, 60Hz, 7.4A or more

<G095-8627>

INSTALLING THE TONER

CARTRIDGE

Warning

• Do not incinerate spilled toner or used toner. Toner

dust might ignite when exposed to an open flame.

• Disposal can take place at our authorized dealer

or at appropriate collection sites.

• If you dispose of the used toner cartridge your-

self, dispose of them according to your local regu-

lations.

Caution

ZKEH185K

• Do not eat or swallow toner.

• Keep toner (used or unused) and the toner car-

tridge out of reach of children.

• Our products are engineered to meet the highest

standards of quality and functionality. When pur-

chasing expendable supplies, we recommend

using only those provided by an authorized dealer.

Important

Do not expose the toner cartridge to a light for a

long time. If you do, the toner cartridge will be

damaged and the print quality might be reduced.

While holding the front cover with both hands

on the left and right sides, press the release

button to open it.

Important

Quick Installation Guide (this sheet)

Setup Guide

Remove the fixing material inserted between

toner cartridge and the printer.

CD-ROM (3)

Power Cord

Printer (including a starter toner cartridge)

Additional Documentation

Paper Wedge

ZKEX810E

While lifting the front side of the toner cartridge,

pull it out of the printer.

ZKEH161E

Note

Do not hold the toner cartridge upside down or

stand it vertically.

Do not put the toner cartridge on an unstable

or tilted surface.

Place the toner cartridge on a flat surface. Pull

out the tape inside the unit horizontally while

holding the cartridge with one hand as shown

in the illustration.

ZKET155E

Important

Be sure to remove the tape completely before installing

the toner cartridge. Otherwise, the printer might be

damaged.

If you pull out the strips when the toner cartridge

is slant or standing on its side, the cartridge might

cause trouble with the printer.

Be sure to pull the tape horizontally. Pulling it

upward or downward may cause the toner to scatter.

Be careful not to make your cloths dirty with toner.

After pulling the tape out of the cartridge, toner scatters

easily. Do not shake the cartridge.

Holding the grips of the toner cartridge, insert

it into the printer until it stops.

ZKEH126E

ZKET121E

Lower the toner cartridge when it touches the

back.

ZKET146E

ZKET145E

Close the front cover by pressing the

indentations on the left and right sides.

ZKET115E

ZKEH135E

Important

Do not close the front cover forcefully. If it does

not close easily, pull out the toner cartridge and

insert it again. After that, close the front cover

again.

Dispose of removed fixing material and tape in

the same manner as ordinary plastic waste.

Lift the front of the tray, and slide it carefully

INSTALLING THE PAPER TRAY

into the printer until it stops.

The default paper settings size are as follows:

Metric version: A4 K (short-edge feed)

Inch version: 8

" x 11" K (short-edge feed)

For settings other than the default paper size, see

"Loading Paper and Other Media" in the Printer

Reference provided as a PDF file on the CD-ROM

labeled "Operating Instructions".

For more information about the paper sizes that

can be set in the paper tray, see "Paper and Other

Media Supported by this Printer" in the Printer

Important

Reference provided as a PDF file on the CD-ROM

labeled "Operating Instructions".

Confirm that the setting of the paper size dial

matches the size and feed direction of the paper

in the tray. Otherwise, the printer might be

Pull out the paper tray until it stops.

damaged or a printing problem might occur.

Do not slide the paper tray in and out with force.

If you do, the front and side paper guides will

move out of the place.

Insert the paper tray aligning the

back of the printer with the

tray cover, and then push in the paper tray cover

ZKEY435E

in the direction shown by the arrow in the

Note

illustration.

Do not touch the three white pins on the left

Note

front side of the printer.

Do not install the paper tray cover if the duplex

unit is installed.

While lifting the front side of the tray, pull it out of

the printer.

ZKEY145E

Load paper into the paper tray with the print

side up.

ZKEY135E

Important

Confirm that the top of the stack is not higher

than the limit mark inside the tray.

Confirm that the paper fits under the rear guide.

ZKEY155E

mark on the

mark on the paper

ZKEX120E