Ricoh P7026N Technisch bulletin - Pagina 2

Blader online of download pdf Technisch bulletin voor {categorie_naam} Ricoh P7026N. Ricoh P7026N 46 pagina's.

Model:

Model K-P1

Descriptions of the changes

Firmware modified to improve print quality when image data is printed using

the PCL6 driver.

Note: This occurs only in the following condition.

- When printing image data

- When using the PCL6 driver

New feature added in the user mode.

"Curl Prevention" mode is added in the user mode.

(Curl Prevention: User mode/ Maintenance)

Please note that the function of this mode is the same as "Curl Control" in the

printer engine service mode.

It lowers the fusing temperature to prevent paper from curling. Advise

customers to use this mode when paper jams occur during duplex rear side

printing.

Note: When this mode is switched on, "Curl Control" in the service mode is

also switched on.

Firmware modified to correct the following problem.

Symptom:

During PCL printing, if data extends over the bottom edge of the printable area, the

machine freezes, displaying "Processing" and operation will no longer be possible.

Condition:

The printer driver is not being used

Print data exists on the bottom edge of the printable area (at 4.2 mm)

Action:

Update the controller firmware.

Firmware modified to make corrections in the German wording.

echnical

Descriptions

4.2

Printable area

The problem occurs only if

data exists on the bottom

edge (4.2mm) of the printable

area .

ulletin

Date:

18-Jan-01

PAGE: 2/3

No.:

RG058001

Version

1.05

1.02