Cisco Unified 7900 Series Release-opmerkingen - Pagina 12

Blader online of download pdf Release-opmerkingen voor {categorie_naam} Cisco Unified 7900 Series. Cisco Unified 7900 Series 20 pagina's. Release notes for firmware release 9.3(1)sr2
Ook voor Cisco Unified 7900 Series: Systeemhandleiding (50 pagina's), Oplossingshandleiding (10 pagina's), Systeemhandleiding (36 pagina's), Gebruikershandleiding (11 pagina's)

Pagina afdrukken

Cisco Unified 7900 Series Release-opmerkingen

Cisco Unified IP Phone Expansion Module firmware installation

• cmterm-7975-sccp.9-3-1SR2-1-readme.html

• cmterm-7975-sip.9-3-1SR2-1-readme.html

Step 8

Follow the instructions in the readme file to install the firmware.

Cisco Unified IP Phone Expansion Module firmware installation

The following sections describe the Cisco Unified IP Phone Expansion Module firmware installation.

Cisco Unified IP Phone Expansion Module 7914 installation

This section describes how to install Cisco Unified IP Phone Expansion Module 7914.

Cisco Unified IP Phone Expansion Module 7914 firmware upgrade issues

The Cisco Unified IP Phones 7906G, 7911G, 7941G, 7941G-GE, 7942G, and 7945G, do not support the

Cisco Unified IP Phone Expansion Module 7914.

You can add a maximum of two Expansion Modules to the Cisco Unified IP Phones 7961G, 7961G-GE,

7965G, 7970G, 7971G, and 7975G.

The filename for Cisco Unified IP Phone Expansion Module 7914 indicates that it is for use with SCCP;

however, it supports both SCCP and SIP. This applies to IP Phones using Cisco Unified Communications

Manager 7.0.

If you are using the Cisco Unified IP Phone Expansion Module 7914, you must upgrade the expansion module

to firmware release S00105000400 before using the phone to support relevant features on your expansion

module.

Install Cisco Unified IP Phone Expansion Module 7914 firmware

To download and install the firmware, perform these steps:

Procedure

Step 1

Go to the following URL:

http://www.cisco.com/cisco/software/navigator.html?mdfid=269065653&i=rm

Step 2

Step 3

Choose the IP Telephony folder by clicking +.

Step 4

Choose IP Phones > Cisco Unified IP Phones 7900 Series.

Step 5

Choose Cisco Unified IP Phone Expansion Module 7914.

Step 6

Choose Skinny Client Control Protocol (SCCP) Software.

Step 7

Choose 5.0(4) under the Latest Releases folder.

Step 8

To download the firmware for Cisco Unified IP Phone Expansion Module 7914, click the Download Now

or Add to cart button and follow the prompts:

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2