Ricoh Pro C9210 Gebruiksaanwijzing - Pagina 16
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ricoh Pro C9210. Ricoh Pro C9210 48 pagina's. Using the auto color diagnosis function
Ook voor Ricoh Pro C9210: Gebruiksaanwijzing (24 pagina's)
Pagina afdrukken
2. Printing Process
Fusing
Fusing Unit
The fusing belt has a thick elastic layer, as with the previous model, to allow the belt to reach farther into
the surface indentations of textured media.
Fusing roller
Pressure roller
There are 5 heaters in the heating roller [2].
Toner is fused onto the media by applying heat to the fusing belt [1] via the heating roller [2],
maintaining consistent temperature and pressure on the media.
The fusing temperature is dependent upon the amount of toner.
(The more there is toner, the more heat needed for fusing.)
The fusing temperature can be adjusted separately for both print modes; FC and BW.
The fusing temperature is momentarily increased one notch immediately before the paper passes
through the nip, to compensate for the slight temperature drop of the fusing belt [1] due to the heat
absorption by the paper.
In addition, the target fusing temperature is momentarily increased another notch immediately before the
pressure roller [3] contacts the fusing belt, to compensate for the slight temperature drop due to the
contact.
Printing starts when the temperature of the fusing belt and pressure roller reaches the temperature range
in which paper feeding is allowed.
14
Fusing belt
Conventional fusing belt
New fusing belt
Toner
Base layer
Elastic layer
Surface layer
Textured paper
Base layer
Elastic layer
Surface layer
Textured paper
1
2
3
DZH306