Ricoh Pro L4160 Veiligheidsmaatregelen - Pagina 10

Blader online of download pdf Veiligheidsmaatregelen voor {categorie_naam} Ricoh Pro L4160. Ricoh Pro L4160 17 pagina's. Wide format color digital imaging system
Ook voor Ricoh Pro L4160: Specificaties (4 pagina's), Handleiding voor verzorging en onderhoud (29 pagina's), Handleiding afdrukken (8 pagina's)

Pagina afdrukken

CAUTIONS and NOTES

Handling of ink cartridges

• The safety evaluation of this machine assumes that

the ink recommended by this company is used. For

safe usage of this machine, use the ink recommend

by this company

• Never refill the ink pack and white ink cartridge with

ink. Refilled ink cartridge can cause a trouble.

Remember that RICOH assumes no responsibility for

any damage caused by the use of the ink cartridge

replenished with ink.

• If the ink cartridge is moved from a cold place to a

warm place, leave it in the room temperature for three

hours or more before using it.

• Open the ink cartridge just before installing it in the

machine. If it is opened and left for an extended

period of time, normal printing performance of the

machine may not be ensured.

• Make sure to store ink cartridges in a cool and dark

place.

• Store ink cartridges and waste ink bottle in a place

that is out of the reach of children.

• Be sure to thoroughly consume the ink in the ink

cartridge, once it is opened, within three months. If an

extended period of time has passed away after

opening the cartridge tank, printing quality would be

poor.

• Neither pound the Eco-cartridge nor shake it violently,

as doing so can cause leakage of ink.

• Do not touch or stain the contacts of the ink cartridge,

as doing so may cause damage to the print circuit

board.

• Consult your sales or service representative for

proper disposal of ink cartridge, ink pack, and waste

ink. Otherwise, commission an industrial waste

disposal company.

Notes on maintenance

• It is strongly recommended to use the machine in a room that is not dusty.

• Keep the front cover closed even when the machine is not printing. If not, dust can accumulate on the nozzles

in the heads.

• Dust in the heads can also cause drops of ink to fall suddenly down on the media during printing. In such a

case, be sure to clean up the heads.

• When cleaning the ink-station or the heads, make sure to wear the attached gloves.

• Perform wiping (removal of dust and paper powder) of the capping station and wiper frequently.

Periodic replacement parts

• Some parts of this machine must be replaced with a new one periodically by service personnel. Be sure to

make a contract with your distributor or dealer for After sale service to ensure a long life of your machine.

Disposition of this machine

• Consult your sales or service representative for proper disposal of this machine. Otherwise, commission an

industrial waste disposal company.

Warning

Front cover and lever

• Never open the front cover or raise the lever during

printing. Opening the cover or raising the lever will

abort printing.

Handling of media

• Use media recommended by RICOH to ensure

reliable, high-quality printing.

• Set the heater temperature to meet the characteristics

of the media.

Set the temperature of the Pre-heater, Print heater and

Post-heater according to the type and characteristics

of the media used. Automatic temperature setting can

be made on the operation panel by setting the profile

on the dedicated RIP. For setting on the RIP, refer to

the instruction manual for your RIP.

• Pay attention to the expansion and contraction of the

media.

Do not use media immediately after unpacking. The

media can be affected by the room temperature and

humidity, and thus it may expand and contract.The

media have to be left in the atmosphere in which they

are to be used for 30 minutes or more after unpacked.

• Do not use curled media.

The use of curled media can not only cause a media

jam but also affect print quality.

Straighten the sheet of media, if significantly curled,

before using it for printing. If a regular-sized coated

sheet of media is rolled and stored, the coated side

has to face outside.

• Do not leave the media with the heater ON for a long

time.

Protection of media from dust

• Store media in a bag. Wiping off dust accumulated on

media will adversely affect the media due to static

electricity.

• When leaving the workshop after the working hours,

do not leave any media on the roll hanger. If any

media is left on the roll hanger, it can get dusty.

Warning