Ricoh Pro L5160 Snel aan de slag - Pagina 11

Blader online of download pdf Snel aan de slag voor {categorie_naam} Ricoh Pro L5160. Ricoh Pro L5160 32 pagina's. Additional function 2
Ook voor Ricoh Pro L5160: Handleiding Rip-instellingen (44 pagina's), Handleiding veiligheidsinformatie (32 pagina's), Handmatig (12 pagina's)

CIP Training L5160/L5130

Additional Functions

⚫

[Inactive] : Roll holder rotate as intermittent drive (stop and go) with loading back tension

to the media while printing or feeding. (Default)

Basically, we recommend using this mode unless there's problem.

[Forceless Feed] : Roll holder does not drive and not load back tension to the media while

⚫

printing or feeding.

*This mode can improve uneven back tensioning caused by stickiness of media surfaces.

⚫

After changing roll holder drive mode, please re-adjust media feed quantity.

For details, see "Adjusting the Media Feed Quantity" in the manual "Operating Instructions

for RICOH Pro L5130/L5160".

⚫

"Forceless Feed" roll holder drive mode is more likely to cause media skewing or floating

than "Inactive" drive mode when using ordinary media (not sticky media).

If the print quality issues such as "Uneven Density" caused by skewing occur, please use

"Inactive" drive mode.

("Solutions manual for RICOH Pro L5130/L5160" provides the solutions for each print quality

issue. Please also refer to it for troubleshooting.)

⚫

In case of sticking on the roll media and not obtaining print quality you expect, please pull

out the media once and wind it around the roll core again.

Please see "Uneven density (Media is stuck on the platen)" in the manual "Solutions

manual for RICOH Pro L5130/L5160".

⚫

The regular print quality cannot be guaranteed when using "Forceless Feed" drive mode. If

you may not obtain the print result you expect, make sure to use appropriate media. For

details about appropriate media, see "About Media" in the manual

"Operating Instructions for RICOH Pro L5130/L5160".