Ricoh Savin CLP17 Supplement handleiding - Pagina 8

Blader online of download pdf Supplement handleiding voor {categorie_naam} Ricoh Savin CLP17. Ricoh Savin CLP17 38 pagina's. Unix supplement

UNIX Configuration

Using the Installation Shell Script

The installation shell script helps with the setup process. The installation shell

script automates some of the tasks in configuring /etc/hosts, /etc/printcap, and

in creating the spool directory for BSD UNIX, and in running the lpadmin com-

mand for System V UNIX.

Preparation

The installation shell script can be used on the following three kinds of work-

stations. This installation shell script cannot be used with other types of work-

stations.

• Solaris 2.5.1, 2.6, 7, 8

• HP-UX 8.x, 9.x, 10.x, 11.0

• Red Hat Linux 6.x, 7, 7.1, 7.2

Depending on the security setting when installed, rsh/rcp/% telnet may not

be usable with RedHat 7.1 or later. Change the security level to the level that

allows use of rsh/rcp/% telnet. For more information about how to change

the setting, see the operating instructions for RedHat.

When you use NIS (Network Information Service) or DNS, you should con-

figure the server before running this installation shell script.

For more information about the configuration utility of your OS, see the man-

ual that comes with the utility.

Preparation

Configure the machine to use the TCP/IP protocol.

• Make sure that the TCP/IP protocol on the machine is set to active. (The

default is active.)

• Assign an IP address to the machine and configure the other settings re-

quired for using the TCP/IP protocol.

Reference

For more information about how to make the above settings, see the Printer

Reference.