Cisco Unified 8961 Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Unified 8961. Cisco Unified 8961 4 pagina's. Cisco systems telephone
Ook voor Cisco Unified 8961: Release-opmerkingen (16 pagina's), Overzicht (30 pagina's), Administratiehandleiding (8 pagina's), Gebruikershandleiding (48 pagina's), Gebruikershandleiding (10 pagina's), Kenmerken (35 pagina's), Snel aan de slag (2 pagina's), Gebruikershandleiding (22 pagina's), Setup (4 pagina's), Snelstarthandleiding (2 pagina's), Snelle referentiehandleiding (3 pagina's), Handmatig (12 pagina's), Snelle referentie (4 pagina's), Snelle blik (3 pagina's), Beknopte handleiding (10 pagina's), Snelstarthandleiding (2 pagina's), (Portugese) Snelstarthandleiding (2 pagina's)

Pagina afdrukken

Cisco Unified 8961 Installatiehandleiding

Chapter 5

Setting Up the Cisco Unified Video Camera

Highlight Cisco Unified Camera.

Step 3

Press the Set-up softkey.

Step 4

Select View Area.

Step 5

Use the arrows on the Navigation pad to increase or decrease the view area.

Step 6

Press the Save softkey.

Step 7

Adjusting the Brightness Setting

The Brightness setting affects the video that you transmit to others. However, it does not affect the video

that you receive from other parties. You can adjust the brightness setting to improve the quality of the

video during streaming.

As the field of view can affect brightness, adjust the View Area feature for your camera before adjusting

Note

the Brightness setting.

To adjust the Brightness setting, follow these steps:

Procedure

On the Cisco Unified IP Phone, press the Applications button

Step 1

Select Accessories.

Step 2

Highlight Cisco Unified Camera.

Step 3

Press the Set-up softkey.

Step 4

Select Brightness.

Step 5

Use the arrows on the Navigation pad to increase or decrease brightness.

Step 6

Press the Save softkey.

Step 7

Adjusting Auto Transmit Setting

The Auto Transmit feature allows you to control the streaming of videos for both inound and outbound

calls.

When Auto Transmit is on (default setting), the camera streams video automatically during calls.

When Auto Transmit is off, video for each call is automatically muted (however, your phone still

receives video). To resume video transmission in this case, press the Unmute Video softkey

To turn the Auto Transmit setting on or off, follow these steps:

Procedure

On the Cisco Unified IP Phone, press the Applications button

Step 1

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.0 (SIP)

OL-20862-01

Adjusting the Camera Settings

5-3