Ricoh SP 311SFNw Aan de slag handleiding - Pagina 31

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Ricoh SP 311SFNw. Ricoh SP 311SFNw 47 pagina's. Network settings guide
Ook voor Ricoh SP 311SFNw: Snelle installatiehandleiding (2 pagina's), Specificaties (4 pagina's), Specificaties (4 pagina's), Installatiehandleiding (2 pagina's)

Ricoh SP 311SFNw Aan de slag handleiding
7. Select [Everyone].
8. For [Full Control], select [Allow] checkbox.
9. Click [OK]  [OK]  [Close].

4.2.2 Register Scan Destination (via Web Image Monitor)

Next, you need to register the network share folder (created in previous section) as a Scan Destination
in the printer's Address Book, using
the printer's control panel.
Important:
Access to Web Image Monitor is possible when the printer is network-connected (wired or wireless),
not via USB-only connection.
To register a scan destination, proceed as follows:
1. Open web browser.
2. In address bar, enter printer's
Note:
If Web Image Monitor Home page does not display, restart the printer and try again.
3. Click [Scan Destination].
RICOH SP 311SFNw B&W Multifunction Laser Printer
Web Image
Monitor. Scan Destinations cannot be registered using
IP
Address, e.g., http://123.45.6.7.
Getting Started Guide
31