Ricoh SP C261DNW Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Ricoh SP C261DNW. Ricoh SP C261DNW 16 pagina's.

Pagina afdrukken

2. Installing the Software

Check how the computer is connected

Specify how to connect to your computer according to the communication environment of your system.

Yes

use your computer for setup?

connect using a CD-ROM

Go to page 6 "Easy Setup

Using the CD-ROM".

• You can use both the CD-ROM and Wi-Fi Setup Wizard to configure the wireless settings for the machine.

• To connect using the WPS button, go to page 9 "Easy Setup Using the WPS Button".

• To connect using a PIN code, go to page 10 "Easy Setup Using a PIN Code".

• To set up manually, see User's Guide in the provided CD-ROM or our website.

• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct

communication among Wi-Fi Direct-compliant devices becomes possible.

When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.

Use the machine from a smart device

■ How to use the machine from a

smart device

From a smart device application, you can use the

following function of the machine:

• Printing photographs and documents stored on

a smart device

After scanning the following QR code with your

smart device, search for the "RICOH Smart

Device Connector" application and download it

from the site that appears.

Android

connect by wireless?

use a router (access point)?

connect via Wi-Fi Direct

See Wi-Fi Direct Guide in our website.

connect using Wi-Fi Setup Wizard

Go to page 7 "Easy Setup Using

the Wi-Fi Setup Wizard".

iOS

connect using a

USB interface cable

Go to page 5 "Connecting the Machine (USB/Network)".

Android

iOS

■ How to use the NFC tag

(Android smart devices only)

Configure the network connection of

the machine. For details, see page 6

"Connecting the Machine via Wi-Fi".

After scanning the following QR code with

your smart device, search for the "RICOH

Smart Device Connector" application and

download it from the site that appears.

DUE075

Start "RICOH Smart Device Connector",

and write the machine's network

information on the NFC tag using the

application.

Perform printing by touching the NFC tag

from "RICOH Smart Device Connector".

connect by wire?

connect using an

Ethernet interface cable

DUE035