Ricoh GXR Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ricoh GXR. Ricoh GXR 6 pagina's. Ricoh gxr: product brochure
Ook voor Ricoh GXR: Brochure & specificaties (14 pagina's)

Pagina afdrukken

3. Copy the firmware to an SD memory card

Caution

Please prepare an SD card with a capacity of 64 MB or above.

There are two ways to copy the firmware into an SD memory card.

• With an SD memory card loaded in the camera, connect the camera and computer with the

provided USB cable, and copy the firmware to the SD memory card

• Using a card reader or a card writer, copy the firmware to an SD memory card (a card reader

or card writer is required)

To copy the firmware by connecting the camera and computer with the USB

cable

If DC Software is installed on your Windows PC, check that DL-10 is not

active.

If DL-10 is active, right-click on the DL-10 icon in the task bar, and click

[Exit].

• If the DL-10 icon is not displayed in the task bar, you do not need to perform Step 2.

Load a battery with adequate remaining power into the camera.

Load the SD memory card into the camera, and turn the power on.

Display the camera's Setup menu, select [Format [Card]], and press the

Fn2 button.

Select [Yes], and press the MENU/OK button.

• The SD memory card is formatted.

Caution

If you format a card that still has images stored on it, the images will be lost. Save the images you do not want to erase in

your computer before formatting the card.

Turn the camera off, and connect the camera and computer with the

provided USB cable.

• The camera turns on automatically. If the camera does not turn on automatically, press the

POWER button and turn the power on.

• If DC Software is installed in your Windows PC, DL-10 may automatically start up. In this

case, exit DL-10.

• Click [Cancel] if the [Removable Disk] dialog appears in Windows XP, Windows Vista or

Windows 7.

• If iPhoto starts up in Mac OS X, exit iPhoto.