Ricoh RDC-7 Aan de slag Handleiding - Pagina 3

Blader online of download pdf Aan de slag Handleiding voor {categorie_naam} Ricoh RDC-7. Ricoh RDC-7 18 pagina's. Image capturing device 3.3 megapixel ccd resolution up to 7 megapixels
Ook voor Ricoh RDC-7: Specificaties (2 pagina's)

Pagina afdrukken

Powering the Camera

This section explains how to load and charge the battery, and how to connect

the AC adapter to power the camera from a household electrical outlet.

Charging the Battery

When using the camera for the first time or when the battery symbol (

charge the battery to its full capacity following the procedure described below.

q Set the battery on the battery charger.

w Insert the plug into an electrical outlet.

Charging will start and continue as shown below. When charging is completed,

disconnect the power plug from the power outlet.

Charge lamp

Lights red

Lights green

Lamp off

Precautions

• Do not use the batteries other than the Ricoh DB-20.

• Use only a Ricoh BJ-1 battery charger to charge the battery.

• Do not use the BJ-1 battery charger to charge batteries other than the DB-20

battery.

• Charge the battery in a well ventilated area with an ambient temperature of

10°C – 40°C (50°F – 104°F).

• When the battery reaches the end of its service life, even if charged correctly,

it will be effective for shorter and shorter periods. Replace with a new battery.

• After charging, the battery will feel hot, but this is normal.

• After charging, remove the power plug from the electrical outlet. Failure to do

so may result in fire.

Charging has started.

The completion of charging (90% of full charge), after

approximately 60 min.

Full charge has been reached, approximately 40 min. after

the lamp lights green.

Contents

) lights,