Cisco Webex 840S Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Cisco Webex 840S. Cisco Webex 840S 12 pagina's. Wireless phone
Ook voor Cisco Webex 840S: Snelle referentiehandleiding (3 pagina's), Handmatig (36 pagina's), Snelle referentiehandleiding (3 pagina's), Snelle referentiehandleiding (3 pagina's)

Phone Setup

Step 4

Insert the two plastic battery tabs directly into the two battery compartment slots.

Step 5

Use the tab and slot contact point as a pivot to lower the battery into the compartment.

Step 6

Use your finger to press down until you feel and hear the battery clip snap into place.

Remove the Battery

Battery removal follows a reversed but similar procedure to battery insertion.

The steps to remove the battery are the same for both the Webex Wireless Phone 860 and Webex Wireless

Phone 840. However, the battery contacts are in different locations on these models. The illustrations in the

following steps are of the Webex Wireless Phone 860.

Phone Battery

Charging, on page 6

Remove the Battery

Phone Setup