Ricoh G058 Technisch bulletin - Pagina 2
Blader online of download pdf Technisch bulletin voor {categorie_naam} Ricoh G058. Ricoh G058 46 pagina's. Envelope feeder
Ook voor Ricoh G058: Installatiehandleiding (1 pagina's), Installatiehandleiding (1 pagina's)
Pagina afdrukken
Model:
Model K-P1
Descriptions of the changes
1.
Firmware modified to improve print quality when image data is printed using
the PCL6 driver.
Note: This occurs only in the following condition.
- When printing image data
- When using the PCL6 driver
2.
New feature added in the user mode.
"Curl Prevention" mode is added in the user mode.
(Curl Prevention: User mode/ Maintenance)
Please note that the function of this mode is the same as "Curl Control" in the
printer engine service mode.
It lowers the fusing temperature to prevent paper from curling. Advise
customers to use this mode when paper jams occur during duplex rear side
printing.
Note: When this mode is switched on, "Curl Control" in the service mode is
also switched on.
Firmware modified to correct the following problem.
Symptom:
During PCL printing, if data extends over the bottom edge of the printable area, the
machine freezes, displaying "Processing" and operation will no longer be possible.
Condition:
The printer driver is not being used
Print data exists on the bottom edge of the printable area (at 4.2 mm)
Action:
Update the controller firmware.
Firmware modified to make corrections in the German wording.
T
echnical
Descriptions
4.2
mm
Printable area
The problem occurs only if
data exists on the bottom
edge (4.2mm) of the printable
area .
B
ulletin
Date:
18-Jan-01
PAGE: 2/3
No.:
RG058001
Version
1.05
1.02