Ricoh G829 Servicehandleiding - Pagina 2

Blader online of download pdf Servicehandleiding voor {categorie_naam} Ricoh G829. Ricoh G829 17 pagina's.

IMPORTANT SAFETY NOTICES

1. Before disassembling or assembling parts of the network scanning box,

make sure that the network scanning box power cord is unplugged.

2. The wall outlet should be near the network scanning box and easily

accessible.

3. The output voltage of the PSU (Power Supply Unit) can be either 100 ~ 240

Vac, without any adjustment. Make sure that the above voltage is used.

4. The power cord should be an approved type, in accordance with the

regulations for the country in which the network scanning box is used.

5. When keeping used lithium batteries in order to dispose of them later, do not

put more than 100 batteries per sealed box. Storing larger numbers or not

sealing them apart may lead to chemical reactions and heat buildup.

Lithium Batteries (Memory Back-up)

CAUTION

The danger of explosion exists if a battery of this type is incorrectly

replaced.

Replace only with the same or an equivalent type recommended by the

manufacturer. Discard used batteries in accordance with the

manufacturer's instructions.

Maintenance Information

The operating instructions explains how to use and maintain the network scanning

Box . Before performing the maintenance, read the operating instructions.

Warning concerning copyright

Many documents are copyrighted. Such documents may not be reproduced by

scanning or in any other form without the express permission of the copyright

holder.

Notice

The contents of this manual are subject to change without notice.

This manual uses several symbols.