Cisco 12816 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Cisco 12816. Cisco 12816 16 pagina's. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Ook voor Cisco 12816: Uitpakinstructies Handleiding (28 pagina's), Gegevensblad (9 pagina's), Handleiding vervangende instructies (32 pagina's), Handleiding vervangende instructies (18 pagina's)

Modifying the equipment without Cisco's authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulation and you may be required to correct any interference to

radio or television communication at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference

stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment

causes interference to radio or television reception, try to correct the interference by using one or more

of the following measures:

•

CISPR 22

This apparatus complies with CISPR 22/EN55022 Class B radiated and conducted emissions

requirements.

Canada

English Statement of Compliance

This class A digital apparatus complies with Canadian ICES-003.

French Statement of Compliance

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Europe (EU)

This apparatus complies with EN55022 Class B and EN55024 standards when used as ITE/TTE

equipment, and EN300386 for Telecommunications Network Equipment (TNE) in both installation

environments, telecommunication centers and other indoor locations.

VCCI Class A Notice for Japan

Warning

This is a Class A product based on the standard of the Voluntary Control Council for Interference by

Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio

disturbance may arise. When such trouble occurs, the user may be required to take corrective

actions. Statement 191

78-15717-01

Turn the television or radio antenna until the interference stops.

Move the equipment to one side or the other of the television or radio.

Move the equipment farther away from the television or radio.

Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,

make certain the equipment and the television or radio are on circuits controlled by different circuit

breakers or fuses.)

Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions

Regulatory, Compliance, and Safety Information