Cisco 1600 series Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 1600 series. Cisco 1600 series 12 pagina's. Rdiag router analog ipsec
Ook voor Cisco 1600 series: Snelstarthandleiding (8 pagina's), Handmatig installeren of vervangen (10 pagina's), Hardware installatiehandleiding (14 pagina's)

C. Connect the router to the wide-area network (continued).

Cisco 1603 ISDN BRI S/T Connection

Note: You must provide a straight-through RJ-45-to-RJ-45 cable and (if required for your site) a network

termination (NT1) device for this connection.

Step 1

Connect one end of the cable to the orange ISDN BRI Ø S/T port on the rear panel.

Step 2

Depending on what is required by your telephone company, do one of the following:

• Connect the other end of the cable to an external NT1, then connect the NT1 to the ISDN wall jack.

• Connect the other end of the cable to the ISDN wall jack (as shown in this illustration).

OK LED