Epson EMP 7900 Netwerkhandleiding - Pagina 13

Blader online of download pdf Netwerkhandleiding voor {categorie_naam} Epson EMP 7900. Epson EMP 7900 43 pagina's. Esc/vp21 command user's guide for business projectors
Ook voor Epson EMP 7900: Specificatie (2 pagina's), Gebruikershandleiding (25 pagina's), Specificaties (4 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (28 pagina's), Gebruikershandleiding (28 pagina's)

3. Check if the following network components are in the list. If they are

already installed, go to "Network Software" on page 29.

The following table lists the network components required for configuring

the network interface with EpsonNet Config.

EpsonNet Config's setting screens

TCP/IP, SNMP (IP trap)

The following table lists the network components required for network

printing.

Printing method

LPR printing

4. If the necessary components are not in the list, click Install to install them.

5. Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area

Connection Properties dialog box to open the Internet Protocols Version 4

(TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask,

etc. and then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section "Connecting

the Network Interface to the Network" on page 16.

Necessary components

Internet Protocol (TCP/IP)

Necessary components

Internet Protocol (TCP/IP)

Setting Up Your System for Network Printing