Cisco 1712 - Security Access Router Hardware installatiehandleiding - Pagina 16
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco 1712 - Security Access Router. Cisco 1712 - Security Access Router 21 pagina's. Security access routers
Ook voor Cisco 1712 - Security Access Router: Snelstarthandleiding (13 pagina's), Gegevensblad (8 pagina's)
Pagina afdrukken
Chapter 2
Installation
Optional Installation Steps
Figure 2-8
Assembling Stacking Clip and Fastener
Push plastic fastener
through small hole
at the end of the
stacking clip.
After assembling the clip and fastener, follow these steps to stack the router with
another device:
Place the clip on top of the lower device, as shown in
Figure 2-9 on page
2-17.
Step 1
Slide the clip forward so that the front tabs slide into the vent slots. Make sure that
the rear hooks fit over the edge of the lower device.
Cisco 1711 and Cisco 1712 Security Access Routers Hardware Installation Guide
2-16
OL-4050-02