ActronAir RC-01 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} ActronAir RC-01. ActronAir RC-01 12 pagina's. Suitable for models: cre-071as, cre-100as, cre-125as, cre-140as, wre-026as, wre-035as, wre-050as, wre-071as, wre-080as, mre-035as, mre-050as

Pagina afdrukken

2. Function Buttons

Overview

8. LED

Activate or Disable the indoor unit Display. Press this

button to hide the indoor unit display, press it again to

illuminate the display.

9. CLOCK

Use to set the time Clock.

NOTE: Press the CLOCK button and TURBO button

together to lock or unlock the keyboard.

10. SLEEP/QUIET

Activate or Disable sleep function. Adjusts and main-

tains the temperature while you sleep and can save

energy. This function is not available on DRY mode.

For more detail on this function please refer to "Sleep

Operation" in your OWNER'S MANUAL.

Hold the button more than 2 seconds to Activate or

Disable QUIET mode. When QUIET mode is initiated,

the indoor fan speed will reduce to minimum air flow

providing a whisper quiet noise.

NOTE:：The unit will disable SLEEP mode if MODE, FAN

or ON/OFF button are pressed.

11. SWING

Used to stop or start vertical louvre movement and

set the desired up/down air flow direction. The vertical

louvre changes 6 degrees in angle for each press.

Hold the button for more than 2 seconds to activate the

auto vertical swing feature.

12. SWING

Used to stop or start horizontal louvre movement and

set the desired left/right air flow direction. The horizontal

louvre changes 6 degrees in angle for each press.

Hold the button for more than 2 seconds to activate the

auto horizontal swing feature.

Remote Control

13. FOLLOW ME/SELF CLEAN

Press this button to Activate or Disable FOLLOW ME

function. When this function is activated, the remote

control will sense and display the temperature

at its location. The remote control will then send this

signal to the air conditioner and continue to do so

every 3 minutes. Press the Follow Me button again

to disable this function. The air conditioner will

cancel the Follow Me function automatically if it

doesn't receive the signal for a period of 7 minutes.

Hold the button more than 2 seconds to Activate or

Disable SELF CLEAN function. Under SELF CLEAN

function, the air conditioner will automatically clean

and dry the Evaporator and keep it fresh for the next

operation. During this operation the indoor screen will

display "SC".

14. TURBO

Press this button to Activate or Disable TURBO function.

Turbo function enables the unit to reach the preset

temperature during cooling or heating operation faster.

NOTE

This remote controller is Universal and can be used with

many different systems. All the functions described are

accomplished by the system, if the system does not have

the feature pressing the button on the remote controller

will have no corresponding operation.

Page 6