Cisco 1812 Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 1812. Cisco 1812 11 pagina's. Integrated services router cabling and installation
Ook voor Cisco 1812: Gegevensblad (16 pagina's), Snelstarthandleiding (11 pagina's)

Pagina afdrukken

Figure 3

Connecting Antennas to the Router

For information about configuring the wireless LAN functionality of your router, see the Cisco Access Router Wireless

Configuration Guide at the following URL:

http://www.cisco.com/en/US/docs/routers/access/1800/wireless/configuration/guide/awg.html

Configuring the Router Using Cisco Router and Security Device Manager

Cisco Router and Security Device Manager (SDM) is a web-based configuration tool that allows you to configure LAN and

WAN interfaces, routing, Network Address Translation (NAT), firewalls, VPNs, and other features on your router. If SDM is

installed on your router, configure the router by following the instructions in the Cisco Router and Security Device Manager

(SDM) Quick Start Guide. If this document was not shipped with your router, you can obtain the SDM software and instructions

for installing it on your router from the following location:

http://www.cisco.com/pcgi-bin/tablebuild.pl/sdm

To obtain the SDM release notes and other SDM documentation, go to the following URL and click the Technical

Documentation link.

http://www.cisco.com/go/sdm

Connecting a PC to the Router Console Port

This step is optional; it is required only if you want to use the Cisco IOS CLI instead of SDM to configure or troubleshoot the

router. To use Cisco IOS, you must connect the router to a terminal or to a PC with terminal emulation software. Terminal

emulation software should be configured with the following settings:

• 9600 baud

• 8 data bits

• No parity bits

• 1 stop bit

The Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide describes how to configure the router

by using Cisco IOS software.