Cisco 2504 Aan de slag handleiding - Pagina 25
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco 2504. Cisco 2504 47 pagina's. Wireless controller
Ook voor Cisco 2504: Gebruikershandleiding (11 pagina's)
Pagina afdrukken
Using the Startup Wizard
Before you can use the startup wizard, you must obtain the information discussed in the
and Information" section on page
configure your controller for basic operation.
Note
The available options appear in brackets after each configuration parameter. The default value appears
in all uppercase letters.
If you enter an incorrect response, the controller provides you with an appropriate error message such
Note
as invalid response, and returns to the wizard prompt.
Press the hyphen key if you need to return to the previous command line.
Note
Table 3
Wizard Setting
System Name
Administrative user name
Administrative password
Management Interface IP Address
Management Interface Netmask
Management Interface Default Router
The startup wizard runs the first time that you power on the controller. The second time you
Note
power it on, the controller prompts you for a login ID and password.
Startup Wizard Information
Running the Bootup Script and Power-On Self Test
8.
Table 3
contains startup wizard information you can use to
Action
Enter the system name, which is the name you want to assign
to the controller. You can enter up to 31 ASCII characters.
Enter the administrative user name to be assigned to this
controller. You can enter up to 24 ASCII characters for each.
The default administrative username is admin.
Enter the administrative password to be assigned to this
controller. You can enter from 3 to 24 ASCII characters for
each.
There is no default administrative password, you must
Note
enter a password.
Enter the IP address of the management interface.
The management interface is the default interface for in-band
management of the controller and connectivity to enterprise
services such as AAA servers.
You can access the controller GUI interface using the
management interface IP address.
Enter the IP address of the management interface netmask.
Enter the IP address of the default router.
Cisco 2500 Series Wireless Controller Getting Started Guide
"Required Tools
25