Cisco 2600 Series Configuratie - Pagina 3

Blader online of download pdf Configuratie voor {categorie_naam} Cisco 2600 Series. Cisco 2600 Series 15 pagina's. Configuring adsl wic to support pppoe clients
Ook voor Cisco 2600 Series: Installatiehandleiding (12 pagina's), Release-opmerkingen (32 pagina's), Toepassingsnotitie (41 pagina's), Gegevensblad (6 pagina's), Bijlage (15 pagina's), Installatiehandleiding (22 pagina's), Overzicht (13 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (5 pagina's)

Purpose

Purpose of this document is to show how to use and configure Cisco 2600 Series

routers. Mainly this document has been done for Laboratory work course (S-38.133) at

Networking Laboratory at HUT. On laboratory course these Cisco's routers are used for

IPv4 routing in small network.

This document includes configuring interfaces up and routing part, which has manual

for RIP (Routing Information Protocol) and for OSPF (Open Shortest Path First). For

other routing protocols among others BGP (Border Gateway Protocol) see for example

Cisco's web site

Chapter 3 is suited very good for example for PC routers running Zebra

Quagga

) as routing daemon, because it has same commands as Cisco routers use.

Mainly this document is collection of Cisco's manuals ([1] – [2], [6] – [7]), which are

modified for our laboratory course's use.

www.cisco.com

www.zebra.org

www.quagga.net

(nowadays