Cisco 2654T6 Herverpakkingshandleiding - Pagina 17

Blader online of download pdf Herverpakkingshandleiding voor {categorie_naam} Cisco 2654T6. Cisco 2654T6 26 pagina's. Cisco systems router owner's manual

Pagina afdrukken

Appendix A

Repackaging the Router

To reinstall the router and scissor-jack platform on the shipping pallet, use

Figure A-7

Use the hand truck to move the chassis to a level, open space with a solid floor.

Step 1

Tilt the chassis upright so that it stands on the scissor-jack platform, then remove

Step 2

the hand truck.

Use the bolts from the original shipping package to attach the eight hold-down

Step 3

brackets to the sides of the scissor-jack platform (two brackets on each side).

Note

Position the U-shaped pallet body behind the scissor-jack platform with the

Step 4

opening facing the back panel of the router.

Use the 3/4-inch (19-mm) socket and ratchet wrench to turn the scissor-jack screw

Step 5

slowly counterclockwise to expand the scissor-jack platform and raise the top of

the scissor-jack platform high enough for the hold-down brackets to clear the top

of the pallet body.

Slide the pallet body around the scissor-jack platform.

Step 6

Slide the pallet front bar into the opening on the pallet body and use the hinge

Step 7

locks to secure it as instructed in these steps:

OL-17440-01

as a reference and follow these steps:

The hold-down brackets are not symmetrical: The bracket plate that

fastens to the side of the scissor-jack platform is narrower than the bracket

plate that fastens to the top of the pallet, and has smaller diameter bolt

holes.

Pivot the butterfly handle on the hinge lock up so that it is perpendicular to

the body of the hinge lock.

Twist the butterfly handle counterclockwise to extend the hinge lock hook to

its maximum reach.

Lower the hinge lock hook over the hinge lock catch on the pallet body.

Twist the butterfly handle clockwise to clamp the hinge lock hook on the

hinge lock catch on the pallet body.

Pivot the butterfly lever down onto the hinge lock body so that it lies flat.

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

Repackaging the Routers

A-17