Cisco 3800 Series configureren - Pagina 27

Blader online of download pdf configureren voor {categorie_naam} Cisco 3800 Series. Cisco 3800 Series 32 pagina's. Password recovery procedure
Ook voor Cisco 3800 Series: Gegevensblad (8 pagina's), Toepassingsnotitie (41 pagina's), Handleiding voor probleemoplossing (15 pagina's), Gegevensblad (20 pagina's), Snelstarthandleiding (40 pagina's), Gebruikershandleiding (7 pagina's)

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

dot11 phone

Example:

Router(config)# dot11 phone

Step 4

end

Example:

Router(config-if)# end

Step 5

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuration Examples for Radio Settings on an Access Point

This section contains the following examples:

•

Configuring Radio Data Rates: Example

The following example shows how to disable the 1-Mbps data rate and set the rest of the data rates to

basic:

configure terminal

interface dot11radio 0

no speed basic-2.0 basic-5.5 basic-11.0

end

copy running-config startup-config

Configuring Radio Data Rates: Example

Configuration Examples for Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enables IEEE 802.11 compliance phone support.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.