Cisco 3825 Series Snelstarthandleiding - Pagina 26

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco 3825 Series. Cisco 3825 Series 38 pagina's. Integrated services routers
Ook voor Cisco 3825 Series: Installatie en upgrades (20 pagina's), Niet-merkgebonden beveiligingsbeleid (30 pagina's), Snelstarthandleiding (40 pagina's)

Pagina afdrukken

Power-Up Procedure

To power up your Cisco router and verify that it goes through its initialization and self-test, perform this procedure. When the

procedure is finished, the Cisco router is ready to configure.

To view the boot sequence, you must have a console connection to the Cisco router before it powers up.

Note

Make sure that your PC is powered up and connected as described in the "Checklist for Power Up" section on page 25.

Step 1

Move the power switch to the ON position on the router. The SYS LED blinks green on both the Cisco 3825 and Cisco

Step 2

3845 routers. During the boot process, the SYS PWR LED on the Cisco 3825 chassis is steady green, and the SYS PWR1

LED or SYS PWR2 LED on the Cisco 3845 chassis are off. If this does not happen, see the "Troubleshooting" document

in the online Cisco 3800 series hardware installation documentation at the following URL:

http://cisco.com/en/US/products/ps5855/tsd_products_support_troubleshoot_and_alerts.html

Startup messages appear in your terminal emulation program window. After Cisco IOS software has finished booting,

the SYS LED for both routers is steady green, and the SYS PWR1 LED or SYS PWR2 LED on the Cisco 3845 chassis

is steady green.

Do not press any keys on the keyboard until the messages stop and the SYS LED is steady green. Any keys pressed

Caution

during this time are interpreted as the first command typed when the messages stop, which might cause the router

to power off and start over. It takes a few minutes for the messages to stop.

Verify the Front Panel LED Indications

The indicator LEDs described in Table 4 provide power, activity, and status information:

Table 5

Cisco 3800 Series LED Indicators

Cisco

3825

3845

LED

Router

SYS

Front

ACT

Front

SYS PWR

Front

—

RPS

Front

—

SYS PWR1

—

Front

Color and State Meaning

Off

Router not receiving power

Steady green

Normal operation

Blinking green

Booting or in ROM monitor mode

Amber

Powered but malfunctioning

Off

No packet activity

Steady or

Packet activity

blinking green

Off

Router not receiving power

Steady green

Normal operation

Off

Connected to primary power system

Steady green

Connected to redundant power system

Off

Power system 1 not present

Steady green

Present and enabled

Amber

Present and malfunctioning