Cisco 4006 - Catalyst Switch Power Handleiding - Pagina 3
Blader online of download pdf Power Handleiding voor {categorie_naam} Cisco 4006 - Catalyst Switch. Cisco 4006 - Catalyst Switch 4 pagina's. User manual
Pagina afdrukkenCisco Catalyst 6509 Switch
The Catalyst 6509 Switch offers different power supply
options (1000W, 1300W, 2500W or 4000W) depending
on the number of phones to be powered. A redundant
solution with 4000W power supplies would draw a
maximum of 4100 Watts.
Recommended UPS: SYH6KNRMT
This is a 4.2 KW Symmetra RM UPS with an N+1 Redundant architecture that will
provide ten minutes of runtime at full load. This product requires a NEMA L6-30R for
input and ships with standard output of two L6-20R and one L6-30R. The customer
should order the 6509 switch with NEMA L6-20P plugs for each power supply.
Cisco Catalyst 6513 Switch
The Catalyst 6513 Switch provides the –48 VDC required to
power the desktop IP phones directly from the switch itself.
Catalyst 6509 Switch offers different power supply options
(1000W, 1300W, 2500W or 4000W) depending on the
number of phones to be powered. A redundant configuration
is recommended.
Recommended UPS: SYP12K12RMT
This is an 8.4 KW Symmetra RM UPS with an N+1 Redundant architecture that will
provide ten minutes of runtime at full load. This product requires a hardwired input and
standard output is six L6-20R and three L6-30R. The customer should order the 6509
switch with NEMA L6-20P plugs for each power supply.
Fig. 9 SYP12K12RMT Front View
(see fig 4 and 5 above)
(Figures 9 and 10)
Fig. 10 SYP12K12RMT Rear View
Fig 7. 6509 Switch
Fig 8. 6513 Switch