Cisco 7100 Series Handleiding installeren - Pagina 2
Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco 7100 Series. Cisco 7100 Series 21 pagina's. Field-replaceable units in vpn routers
Ook voor Cisco 7100 Series: Snelstarthandleiding (25 pagina's)
Pagina afdrukken
Required Tools
Required Tools
You need the following tools and equipment:
•
•
•
•
Safety Recommendations
For international agency compliance, safety, and statutory information for Cisco 7100 series routers,
refer to the Regulatory Compliance and Safety Information for Cisco 7100 Series VPN Routers
document that shipped with the router.
Any device that uses electricity must be handled carefully; follow these guidelines to ensure general
safety:
•
•
Warning
safety cover installed. Operating the unit without the cover in place will invalidate the safety
approvals and pose a risk of fire and electrical hazards.
•
•
•
•
•
•
•
•
•
•
Warning
regulations.
2 Installing Field-Replaceable Units in Cisco 7100 Series VPN Routers
Number 2 Phillips screwdriver
Electrostatic discharge (ESD)-preventive wrist strap
Rack-mount kit (if rack-mounting)
Synchronous random-access memory (SDRAM) dual in-line memory modules (DIMMs) (if
replacing SDRAM DIMMs)
Keep the chassis area clear and dust-free during and after installation.
Put the removed chassis cover in a safe place.
The safety cover is an integral part of the product. Do not operate the unit without the
Keep tools away from walk areas where you and others could fall over them.
Do not wear loose clothing, jewelry (including rings and chains), or other items that could get
caught in the chassis. Fasten your tie or scarf and roll up your sleeves.
Wear safety glasses if you are working under any conditions that might be hazardous to your
eyes.
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
The installation of the router should be in compliance with national and local electrical codes. In
the United States, National Fire Protection Association (NFPA) 70, United States National
Electrical Code. In Canada, Canadian Electrical Code, part I, CC22.1. In other countries,
International Electrotechnical Commission (IEC) 364, part 1 through part 7.
Never attempt to lift an object that might be too heavy for you to lift by yourself.
Always power off (O) the power supplies and unplug all power cables before opening the chassis.
Always unplug the power cable before installing or removing a chassis.
The AC-powered routers ship with a three-wire electrical grounding-type plug, which only fits
into a grounding-type power outlet. This is a safety feature. The equipment grounding should be
in accordance with local and national electrical codes.
The routers operate safely when used in accordance with their marked electrical ratings and
product usage instructions.
Ultimate disposal of this product should be handled according to all national laws and