ActSafe PPS Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ActSafe PPS. ActSafe PPS 16 pagina's. Portable

Pagina afdrukken
J
ActSafe Portable Power Supply
The Power Supply is a nearly unlimited
source of power that enables you to carry
out extensive lifting with ACCII Power
Ascenders almost continuously without
reliance on batteries.
The limits of this system will only be
reached under extreme conditions.
Lowering high loads over long distances
will cause the Power Supply to become
hot and eventually switch itself off due to
the in-built overheating protection system.
This is indicated by the LED flashing, once
the Power Supply has cooled down the
LED will revert to its normal 'on' state and
the Power Supply may be used again.
Note
Once the Ascender/Power Supply has overheated initially,
an extended cooling period is recommended to prevent
an immediate recurrence.
Actsafe_Power_Supply_Manual_vAW_v3.indd 11
PERFORMANCE
ACCII
The nearly unlimited supply of power
will have, under extreme conditions,
an effect on the ACCII Ascender.
When lifting high loads over long
distances the ACCII Ascender will
become hot and may eventually switch
itself off due to the in-built overheating
protection system. The Ascender can
be switched on when cooled down
and may be used again.
Speed
The Power Supply enables a higher
maximum lifting speed of 25 m/min
for the ACCII Ascender.
Laboratory tests have shown that
the overheat protection will be
activated in the following
circumstances:
Load
Maximum distance
before overheating
ACC
(Lifting)
400 m
100 kg
100 m
200 kg
CAUTION
When lowering heavy loads for long distances the aluminium
side-panels of the Power Supply may become hot and should
not be touched. It is also advisable to wear protective gloves.
PPS
(Lowering)
500 m
100 m
07/04/2015 14:14