C2AI MVE222S-65 Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} C2AI MVE222S-65. C2AI MVE222S-65 7 pagina's. Globe valves actuators
Pagina afdrukken
End Point Auxiliary Switches (with accessory DMVE)
End point switches change over when the valve is fully open or
closed. They are free contact with 24V AC/DC, 4A max voltage to
terminals.
End point switches can be utilized to indicate valve stroke end posi-
tions and for relay control of additional plant equipment. When the
actuators are controlled individually or in sequence, it is possible to
use the end switches to toggle when the valve is fully open or fully
closed. The auxiliary switch position according to control signal (Y) is
shown in the table below.
Control signal (Y)
0-0,5Vdc
0,5-9,5Vdc
9,5-10Vdc
CLOSING RELAY
K1
K2 KC1
TECHNICAL CHARACTERISTICS
DESCRIPTION
Supply voltage F N
Power consumption (running)
Power consumption (holding)
Modulating
Running time
Increase/decrease
Stroke
Force
Duty cycle
Analogue input Y M
Digital inputs Y1 Y2
Output V+
Output U
Room temperature
Room humidity
Protection degree
Insulation class
Standard
Material
Colour
Weight [kg]
Relay
Relay
KC1
KC2
KC1 to K2
KC2 to K3
KC1 to K1
KC2 to K3
KC1 to K1
KC2 to K4
DMVE
OPENING RELAY
K3
K4 KC2
MVE204-65
MVE204S-65
10VA / 4,5W
8VA / 4W
400 N
voltage 0-10V - impedance > 100kΩ (range: 0-10Vdc, 2-10Vdc, 0-5/2-6Vdc, 5-10/6-10Vdc)
Emission/Immunity EMC 2014/30/UE according to EN 61326-1:2013 standard
Diagnostic
The actuator is provided with a self diagnostic algorithm able to de-
tect faulty conditions:
•
stroke calibration out of range 5-60mm;
•
unexpected stall condition (e.g. valve stuck or extra stroke due
to actuator link loose);
•
voltage supply out of range.
These faulty conditions are signalled via the GREEN and RED LED on
the electronic board blinking accordingly (see Diagnostic – Alarm
Function Table).
IP65
Protection against water and solid object IP65 is guaranteed by in-
ternal seals, IP65 cable gland and the proper engineering of the en-
closure.
One IP65 PG13,5 cable gland and one IP65 PG13,5 plug are supplied
with the actuator.
MVE206-65
MVE210-65
MVE206S-65
MVE210S-65
230Vac ±10%, 50-60Hz
13VA / 6W
18VA / 8W
11VA / 5W
11VA / 5W
15 s (for valves with stroke from 5 to 15 mm)
20 s (for valves with stroke from 15 to 25 mm)
30 s (for valves with stroke from 25 to 60 mm)
60 s
5-60 mm (limited to 30 mm for MVE2xxS-65)
600 N
1000 N
max 50%/60 minutes
500 Ω (range 4-20mA)
connection of Y1, Y2 to M
voltage 16Vdc ± 0,5V, max load 25mA,
voltage 2-10Vdc (0-100%), max load 2mA
operation -10T55°C; storage -20T55°C
max 90% R.H.
IP65
LVD 2014/35/UE according to EN61010-1:2010 standard
housing: aluminium - cover: ABS plastic
aluminium / white
1.7 (MVE2xx-65); 1.6 (MVE2xxS-65)
MVE215-65
MVE222-65
MVE215S-65
MVE222S-65
21VA / 11W
25VA / 10W
13VA / 7W
10VA / 4W
60 s
(for valves with
stroke from 5 to 60
mm)
1500 N
2200 N
Page 2