Cisco Linksys SGE2000P Gegevensblad - Pagina 2
Blader online of download pdf Gegevensblad voor {categorie_naam} Cisco Linksys SGE2000P. Cisco Linksys SGE2000P 6 pagina's. 24-port gigabit switch: poe
Ook voor Cisco Linksys SGE2000P: Release Release (16 pagina's), Gegevensblad (6 pagina's), Handleiding voor firmware-upgrade (5 pagina's), Handmatig (6 pagina's)
Pagina afdrukken
Features
Twenty-four 10/100/1000 Ethernet ports
●
Four Small Form-Factor Pluggable (SFP) slots (shared with four copper ports) for fiber Gigabit Ethernet
●
expansion
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 copper ports
●
Up to 15.4W available on the copper ports for powering PoE-enabled wireless access points or VoIP
●
handsets, with a maximum per-device PoE delivery of 185W available for all ports
Dual images for resilient firmware upgrades
●
48-Gbps, nonblocking, store-and-forward switching capacity
●
Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of service (ToS) traffic
●
prioritization specifications
Fully resilient stacking for optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and security
●
Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
●
(GVRP) and Generic Attribute Registration Protocol (GARP)
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol (LACP)
●
Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast flood control
●
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 10KB
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote Monitoring (RMON)
●
support
Fully rack mountable using the included rack-mounting hardware
●
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SGE2000P 24-Port
Gigabit Switch.
Table 1.
Feature
Specifications
Ports
Buttons
Cabling type
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Specifications for the Cisco SGE2000P 24-Port Gigabit Switch: PoE
Description
● 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit SFP slots
● Console port
● Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
● Auto negotiate/manual setting
● RPS port for connecting to redundant power supply unit
Reset button
● Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
● UTP Category 5 Ethernet or better for 1000BASE-T
Data Sheet
Page 2 of 6