Cisco NCS 6008 Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Cisco NCS 6008. Cisco NCS 6008 12 pagina's. 6000 series network convergence system routers unpacking, moving, and securing guide
Ook voor Cisco NCS 6008: Handleiding uitpakken, verplaatsen en vastzetten (44 pagina's)

Pagina afdrukken

Perform Clock Synchronization with NTP Server

Example:

RP/0/RP0/CPU0:router(config)#hw-module location 0/1/CPU0 slice 3 shutdown

Shuts down the specified slice. The interfaces belonging to the slice that is shut down are deleted from the system and

are not visible in the output of the show interfaces brief command.

Step 3

commit

What to do next

To make a shutdown slice operational, use the no hw-module location rack/slot/CPU slice slice_number

shutdown command.

Verify the slice shut down using show platform in XR VM or show platform slices in System Admin VM.

Perform Clock Synchronization with NTP Server

There are independent system clocks for the XR VM and the System Admin VM. To ensure that these clocks

do not deviate from true time, they need to be synchronized with the clock of a NTP server. In this task you

will configure a NTP server for the XR VM. After the XR VM clock is synchronized, the System Admin VM

clock will automatically synchronize with the XR VM clock.

Before you begin

Configure and connect to the XR VM management port.

SUMMARY STEPS

1. configure

2. ntp server server_address

3. commit

4. exit

5. sh run ntp

DETAILED STEPS

Step 1

configure

Step 2

ntp server server_address

Example:

The XR VM clock is configured to be synchronized with the specified sever.

RP/0/RP0/CPU0:router#ntp server 64.90.182.55

The System Admin VM clock is configured to be synchronized with the specified sever.

sysadmin-vm:0_RP0#ntp server 64.90.182.55

Step 3

commit

Step 4

exit

Bring-up the Cisco NCS 6008 Router