Cisco Nexus 5000 Series Referentiehandleiding - Pagina 5

Blader online of download pdf Referentiehandleiding voor {categorie_naam} Cisco Nexus 5000 Series. Cisco Nexus 5000 Series 12 pagina's. Configuring ip source guard
Ook voor Cisco Nexus 5000 Series: Release Release (26 pagina's), Snelle referentiehandleiding (14 pagina's), Release Release (26 pagina's), Handleiding voor probleemoplossing (8 pagina's), Handmatig (11 pagina's), Handmatig (6 pagina's), Handmatig (7 pagina's), Bedieningshandleiding (45 pagina's), Configuratiehandleiding (6 pagina's)

• Enable the management interface.

switch# conf t

switch(config)# interface mgmt 0

switch(config)# ip address 198.51.100.1/24

switch(config)# vrf context managment

switch(config)# ip route 203.0.113.1/0 1.2.3.1

• Enable the NX-API nxapi feature.

switch# conf t

switch(config)# feature nxapi

switch(config)# nxapi sandbox

• Open a browser and enter http://mgmt-ip to launch the NX-API Sandbox. The following figure is an example of a request and

output response.

Figure 1: NX-API Sandbox with Example Request and Output Response

In the NX-API Sandbox, you specify the commands, command type, and output type in the top pane. Click the POST Request button

above the left pane to post the request. Brief descriptions of the request elements are displayed below the left pane.

After the request is posted, the output response is displayed in the right pane.