Cisco Nexus 7000 Series Configuratiehandleiding - Pagina 14

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 28 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Configuring the Catena Solution

Transparent Mode

Figure 1: Transparent Mode

shows the traffic flow between appliances in the transparent mode when Catena

is enabled, enabled with bad traffic, and disabled. Any traffic that is not secured and is expected to be blocked

by the firewall is bad traffic.

Figure 1: Transparent Mode

Catena uses source IP or destination IP to determine the egress interface. Egress interface ports are bundled

using the link aggregation control protocol (LACP), and hash algorithms are used for symmetric load balancing.

Cisco Nexus 7000 Series Switches Configuration Guide: The Catena Solution