Cisco Nexus 9000 Series Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Nexus 9000 Series. Cisco Nexus 9000 Series 12 pagina's. Switch chassis
Ook voor Cisco Nexus 9000 Series: Snelstartconfiguratiehandleiding (6 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (32 pagina's), Handmatig (30 pagina's), Installing (8 pagina's), Snelstarthandleiding (14 pagina's), Handmatig (16 pagina's)

Grounding the Chassis

c) Holding the chassis level, insert two screws (12-24 or 10-32, depending on the rack type) in each of the two front

rack-mount brackets (using a total of four screws) and into the cage nuts or threaded holes in the vertical rack-mounting

rails (see the following figure).

Figure 4: Attaching the Switch to the Rack

Fasten the chassis to the front of the rack with two

12-24 or 10-32 screws on each side.

Front-mount bracket.

d) Tighten the 10-32 screws to 20 in-lb (2.26 N·m) or tighten the 12-24 screws to 30 in-lb (3.39 N·m).

Grounding the Chassis

The switch is grounded when you connect the chassis and the power supplies to the earth ground in the

following ways:

• You connect the chassis (at its grounding pad) to the data center ground. If the rack is fully-bonded and

Cisco Nexus 9372TX ACI-Mode Switch Hardware Installation Guide

grounded, you can ground the switch by connecting it to the rack.

Mounting rails on rack or cabinet posts.

Installing the Switch Chassis