CAB 5326C Montagehandleiding - Pagina 9

Blader online of download pdf Montagehandleiding voor {categorie_naam} CAB 5326C. CAB 5326C 15 pagina's. Vacuum-belt applicator

Mounting

Fig. 4

Mounting applicator on printer

Attention!

Initiation, adjustments and changing of parts is to be performed by qualified service personal only.

 Initiation/Service Manual Applicators

Attention!

 Disconnect the printer from the power supply before mounting the applicator!

 Ensure the printer is standing firmly in a secure position!

To clean the applicator and printer it's sometimes necessary to turn away or even dismount the applicator from the

printer.

Do not adjust the setting screws, throttle valves or other alignment elements. This will enable use of the applicator

directly after cleaning.

Turning away & dismounting the applicator

1. Loosen the screws (6) from the lower attachment (7) first.

2. Support the applicator and loosen screws (5). The applicator will drop due to its own weight.

3. Move the applicator forward a little to disconnect SUB-D 15 connector (3).

4. Lift the applicator off the printer.

Remounting the applicator

5. Lift the applicator onto the printer and connect SUB-D 15 male connector (1).

6. Slide in and settle the applicator via the connection (7). Line up holes (4) of the mounting plate and to holes (2) of

the printer.

7. Insert and tighten the Screws (5).

8. Insert and tighten the Screws (6).