Cisco RV130 Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco RV130. Cisco RV130 13 pagina's. How to reboot and reset to factory default settings
Ook voor Cisco RV130: Kenmerken en specificaties (4 pagina's), Beknopte handleiding (3 pagina's)

Pagina afdrukken
Cisco RV130 Snelstarthandleiding

Using the Setup Wizard

4
The Setup Wizard and Device Manager are supported on Microsoft
Internet Explorer 7.0 or later, Mozilla Firefox 3.5 or later, Apple Safari 3.0 or
later, and Google Chrome 5.0 or later.
To configure the device by using the Setup Wizard:
Power on the PC that you connected to the LAN1 port in
S
1
TEP
the
Connecting the Equipment
client of the device and receives an IP address in the 192.168.1.xxx
range.
Launch a web browser window on your PC.
S
2
TEP
In the address bar, enter the default IP address of the device
S
3
TEP
192.168.1.1. A site security certificate message appears. Cisco
RV130/RV130W uses a self-signed security certificate. This
message appears because the device is not known to your PC.
Click Continue to this website (or the option shown on your
S
4
TEP
particular web browser) to continue. The login page appears.
Enter the username and password. The default username is cisco.
S
5
TEP
The default password is cisco. Passwords are case sensitive.
Click Log In. The Router Setup Wizard is luanched.
S
6
TEP
Follow the on-screen instructions to set up your device. The Router
S
7
TEP
Setup Wizard tries to automatically detect and configure your
connection. If it is unable to do so, it might ask you for information
about your Internet connection. Contact your ISP for this
information.
Change the password as instructed by the Router Setup Wizard or
S
8
TEP
follow the instructions in the
Username and Password
new username and password.
The Device Manager Getting Started page appears. It displays the
most common configuration tasks.
Click one of the listed tasks or a task listed in the navigation bar to
S
9
TEP
complete the configuration.
Save any additional configuration changes and log out of Device
S
10
TEP
Manager.
8
section. Your PC becomes a DHCP
Changing the Administrator
section. Log into the device with the
Cisco RV130/RV130W Mutlifunction VPN Router
Step 3
of