Cisco RV180W Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Cisco RV180W. Cisco RV180W 14 pagina's. Wan configuration
Ook voor Cisco RV180W: Snelstarthandleiding (3 pagina's)

Pagina afdrukken
Cisco RV180W Handmatig
WAN Configuration on RV180 AND RV180W
Objectives
This document explains how to configure the IPv4 WAN(Internet) for use with a Static IP on
the RV180 and RV180W.
Static IP is for use with internet providers who assign the user a permanent IP address.
Using a static IP is less secure because the IP address is always the same, however it is
more dependable for some services. Such as Voice over Internet Protocol(VOIP) or if you
using the computer for a server.
Applicable Devices
• RV180
• RV180W
Steps of Procedure
Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4
WAN (internet). The IPv4 WAN (internet) page opens.
Step 2. Choose the Static IP option from the Internet Connection Type drop-down menu.