CAB MAESTRO 3E/600 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CAB MAESTRO 3E/600. CAB MAESTRO 3E/600 14 pagina's. Pcb separator

Installation

3.5

Adjustment of the Stop of the Upper Blade

Notice!

The lower stop of the upper blade adjustment is already adjusted by delivery.

 After a long operation time, while working at strongly varying temperatures or else after replacing a

blade, it is recommended to re-adjust the lower stop.

Fig. 6

Adjustment of the stop of the upper blade

1. Move the upper blade carrier (1) in the middle position of the lower blade.

2. Hold the knob (4) and loosen the knurled knob (7).

3. Rotate the pointer (2) with the knob (4) anti-clockwise into position "16".

4. Loosen the cylinder screw (3).

5. Move the knob (4) clockwise until the upper and lower blades gently touch without overlapping.

6. Hold tight the knob (4) and tighten the knurled knob (7).

7. Swing the strut (5) clockwise until you reach the stop and tighten the cylinder screw (3). This adjustment locks the

upper blade in place to prevent it from moving out of adjustment.

8. Re-adjust the upper blade position  3.4 on page 8.

5 6